most electrical, and home appliances made from plastic, one of technology to make plastic product is using mold, specially injection mold of thermoplastic, basically when thermoplastic material heated, they will change of state, thermoplastic material will become soft, melt and flowable, when cooled again, they become solid again.

What is Injection Mold ?

there are some definition of injection mold

is a manufacturing technique for making parts from both thermoplastic and thermosetting plastic materials in production (wikipedia.com)

A manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold.(www.answer.com)

Herbert Ress, 2002 : an injection mold is arrangement, in one assembly a number of cavity spaces built to shape of the desired product, with the purpose of producing plastic parts in large number

this blog define injection mold is manufacturing process to make plastic product that have cavity spaces to shape the product by heating and injection pressure.

Types of Injection Molds

based on how injection mold would be processed wikipedia.org devide injection mold as 7 types until now, they are

1. Reaction injection molding

2. Liquid injection molding

3. Gas assist injection molding

4. Co-injection molding

5. 2-Shot Injection Molding

6. Fusible core injection molding

7. Rapid injection molding

based on type of opening method and runner system, The DIN ISO standard 12165, "Components for Compression, Injection, and Compression-Injection Molds" classifies molds on the basis of the following criteria:

1. standard molds (two-plate molds)

2. split-cavity molds (split-follower molds) stripper plate molds

3. three-plate molds

4. stack molds

5. hot runner molds

depending on material to be injected classifies as :

1.thermoplastic injection molds

2.elastomer molds

3.thermoset molds

4.structural foam molds

picture below shown 3 plate mold type with cold runner system and ejection system

click the picture to enlarge